Build exactly what you need with nothing preset.
All of our drag wheels are designed to hold up on the street as the barrels and spoke thicknesses are held to the same cornering fatigue and load ratings as our standard monoblock wheels.
Build exactly what you need fitment wise without any compromise of preset boxed wheels. Select all options as you typically would with any of our wheels by choosing the design, finish, and more.
Each setup can be built as four wheel drag specific package with skinny fronts or built as a six wheel street setup with four standard size wheels and a pair of matching smaller diameter rears.
FORGED DRAG WHEELS
Built per order setup utilizing a 18×5″ skinny fronts and 15″, 17″, or 18″ rear wheels specifically for drag use with radial or bias ply tires. Even though setup for drag use these wheels are produced with the same material thicknesses and load ratings as all our other wheels so they can be driven on the street.
Built per order setup utilizing standard width front wheels in conjunction with a 15″, 17″, or 18″ rear wheel to support a drag rail or bias ply tires. These setups can also be built as a full set of standard street wheels with a matching pair of 15″, 17″, or 18″ rear wheels to swap over to when headed to the drag strip.
DRAG SPECIFIC SIZING
MOST COMMON DRAG PACKAGE SIZES
|Size||Backspacing Range||Brake Clearance|
|18×5.0||3.25″ to 1.50″||BBK Compatible (395mm)|
|15×9.0||7.25″ to 5.50″||knurled beadseats|
|15×10.0||8.25″ to 6.50″||knurled beadseats|
|17×9.5||7.75″ to 4.00″||knurled beadseats|
|17×10.5||8.75″ to 5.00″||knurled beadseats|
|17×11.0||9.25″ to 5.50″||knurled beadseats|
|18×10.5||8.75″ to 5.00″||knurled beadseats|
|18×11.0||9.25″ to 5.50″||knurled beadseats|
|18×12.0||10.25″ to 6.50″||knurled beadseats|