MODULAR FORGED TRUCK WHEELS
Two-piece fastened modular 5 lug, 6 lug, and 8 lug truck wheels.
6061-T6 Aluminum
BC Forged two piece fastened modular wheels are machined from only the highest quality forged 6061-T6 aluminum creating a wheel that is not only strong but stiff and lightweight.
Billet Center Caps
Low profile milled caps for light duty applications such as a Chevy Silverado 1500 and Toyota Tacoma. Extended bolt-on milled caps for heavy duty applications such as the Ford F250 and Dodge Ram 2500.
Finishing Options
BC Forged two piece fastened modular wheels are offered in many different finishes. All wheels are held to the highest standards of finish quality.
FORGED TRUCK WHEELS
SOMETHING DIFFERENT FROM THE RUN OF THE MILL
LE SERIES
DODGE RAM 2500 BY GOLDEN MOTORS
LE-T816
LE SERIES
DODGE RAM 2500 BY GOLDEN MOTORS
LE-T816
LE SERIES
CHEVROLET SILVERADO 1500 BY MILES AT COBB TUNING
LE61
LE SERIES
2018 FORD F250 PLATINUM
LE-T832
LE SERIES
2018 FORD F250 PLATINUM
LE-T832
HEAVY-DUTY | 8 LUG APPLICATIONS
LIGHT-DUTY | 5 LUG & 6 LUG APPLICATIONS
LE/MLE SERIES
AVAILABLE IN 18, 20, AND 22 INCH DIAMETERS | 6 LUG APPLICATIONS
WHEEL SIZING OPTIONS
CHOOSE FROM STANDARD OR CUSTOM SIZING
EXTENSIVE OPTIONS
Standard Sizing
Even though every set of our wheels are custom built per order sometimes simple is better. When it comes to wheel diameter, width, and backspacing/offset there are some industry standards that just work so why mess with that. All other aspects of the wheel build from center concavity, lip size, and finishing options will still make them your own.
Custom Sizing
Take advantage of each set of our wheels being custom built per order at no additional charge. Every trucks combination of parts between lift height, bumpers, and tire sizing all play a roll in your new wheels clearances. Sometimes the standard sizings offered by most could be made better if backspacing/offset were adjusted or rim width was tweaked to adjust for tire bulge or stretch.
22" Diameter - Standard Sizing
20" Diameter - Standard Sizing
18" Diameter - Standard Sizing
22" Diameter - Standard Sizing
| Size | Backspacing | Offset | Center Profile | Lip Size | 6 Lug PCD | 8 Lug PCD |
| 22×9.0 | 5.75″ | +20 | Mild Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 22×9.0 | 4.50″ | -15 | Medium Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.0 | 6.25″ | +20 | Mild Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.0 | 6.25″ | +20 | Medium Concave | 55mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.0 | 4.75″ | -25 | Medium Concave | 69mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.0 | 4.75″ | -25 | Mild Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.0 | 4.75″ | -25 | Extreme Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 22×12.0 | 4.75″ | -45 | Extreme Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
| 22×12.0 | 4.50″ | -50 | Extreme Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
| 22×14.0 | 5.50″ | -50 | Extreme Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
20" Diameter - Standard Sizing
| Size | Backspacing | Offset | Center Profile | Lip Size | 6 Lug PCD | 8 Lug PCD |
| 20×9.0 | 5.75″ | +20 | Mild Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 20×9.0 | 4.50″ | -15 | Medium Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.0 | 6.25″ | +20 | Mild Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.0 | 6.25″ | +20 | Medium Concave | 55mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.0 | 4.75″ | -25 | Medium Concave | 69mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.0 | 4.75″ | -25 | Mild Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.0 | 4.75″ | -25 | Extreme Concave | 44mm | Up to 6×139.7 | Up to 8×180 |
| 20×12.0 | 4.75″ | -45 | Extreme Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
| 20×12.0 | 4.50″ | -50 | Extreme Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
| 20×14.0 | 5.50″ | -50 | Extreme Concave | 93mm | Up to 6×139.7 | Up to 8×180 |
18" Diameter - Standard Sizing
| Size | Backspacing | Offset | Center Profile | Lip Size | 6 Lug PCD | 8 Lug PCD |
| 18×9.0 | 5.75″ | +20 | Mild Concave | 44mm | Up to 6×139.7 | Not Available |
| 18×9.0 | 4.50″ | -15 | Medium Concave | 44mm | Up to 6×139.7 | Not Available |
| 18×10.0 | 6.25″ | +20 | Mild Concave | 44mm | Up to 6×139.7 | Not Available |
| 18×10.0 | 6.25″ | +20 | Medium Concave | 55mm | Up to 6×139.7 | Not Available |
| 18×10.0 | 4.75″ | -25 | Medium Concave | 69mm | Up to 6×139.7 | Not Available |
| 18×10.0 | 4.75″ | -25 | Mild Concave | 93mm | Up to 6×139.7 | Not Available |
| 18×10.0 | 4.75″ | -25 | Extreme Concave | 44mm | Up to 6×139.7 | Not Available |
| 18×12.0 | 4.75″ | -45 | Extreme Concave | 93mm | Up to 6×139.7 | Not Available |
| 18×12.0 | 4.50″ | -50 | Extreme Concave | 93mm | Up to 6×139.7 | Not Available |
22" Diameter - Custom Build Ranges
| Size | Backspacing | Offset | Center Profile | Lip Size | 6 Lug PCD | 8 Lug PCD |
| 22×8.5 | 6.50″ to 0.00″ | +45mm to -115mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×9.0 | 7.00″ to 0.50″ | +50mm to -110mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×9.5 | 7.50″ to 1.00″ | +60mm to -105mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.0 | 8.00″ to 1.50″ | +65mm to -100mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×10.5 | 8.50″ to 2.00″ | +70mm to -95mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×11.0 | 9.00″ to 2.50″ | +75mm to -90mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×11.5 | 9.50″ to 3.00″ | +85mm to -85mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×12.0 | 10.00″ to 3.50″ | +90mm to -75mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×12.5 | 10.50″ to 4.00″ | +95mm to -70mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×13.0 | 11.00″ to 4.50″ | +100mm to -65mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×13.5 | 11.50″ to 5.00″ | +110mm to -60mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 22×14.0 | 12.00″ to 5.50″ | +115mm to -55mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
20" Diameter - Custom Build Ranges
| Size | Backspacing | Offset | Center Profile | Lip Size | 6 Lug PCD | 8 Lug PCD |
| 20×8.5 | 6.50″ to 0.00″ | +45mm to -115mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×9.0 | 7.00″ to 0.50″ | +50mm to -110mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×9.5 | 7.50″ to 1.00″ | +60mm to -105mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.0 | 8.00″ to 1.50″ | +65mm to -100mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×10.5 | 8.50″ to 2.00″ | +70mm to -95mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×11.0 | 9.00″ to 2.50″ | +75mm to -90mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×11.5 | 9.50″ to 3.00″ | +85mm to -85mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×12.0 | 10.00″ to 3.50″ | +90mm to -75mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×12.5 | 10.50″ to 4.00″ | +95mm to -70mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×13.0 | 11.00″ to 4.50″ | +100mm to -65mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×13.5 | 11.50″ to 5.00″ | +110mm to -60mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
| 20×14.0 | 12.00″ to 5.50″ | +115mm to -55mm | Flat to Extreme Concave | 44mm to 93.1mm | Up to 6×139.7 | Up to 8×180 |
18" Diameter - Custom Build Ranges
| Size | Backspacing | Offset | Center Profile | Lip Size | 6 Lug PCD | 8 Lug PCD |
| 18×8.0 | 6.00″ to 4.00″ | +45mm to -15mm | Flat to Medium Concave | 44mm | Up to 6×139.7 | Not Avaialble |
| 18×8.5 | 6.50″ to 4.00″ | +50mm to -20mm | Flat to Medium Concave | 44mm to 55mm | Up to 6×139.7 | Not Avaialble |
| 18×9.0 | 7.00″ to 4.00″ | +55mm to -25mm | Flat to Medium Concave | 44mm to 67mm | Up to 6×139.7 | Not Avaialble |
| 18×9.5 | 7.50″ to 4.50″ | +60mm to -20mm | Flat to Medium Concave | 44mm to 67mm | Up to 6×139.7 | Not Avaialble |
| 18×10.0 | 8.00″ to 3.50″ | +65mm to -45mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
| 18×10.5 | 8.50″ to 4.00″ | +70mm to -40mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
| 18×11.0 | 9.00″ to 4.50″ | +80mm to -35mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
| 18×11.5 | 9.50″ to 5.00″ | +85mm to -30mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
| 18×12.0 | 10.00″ to 5.50″ | +90mm to -25mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
| 18×12.5 | 10.50″ to 6.00″ | +95mm to -20mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
| 18×13.0 | 11.00″ to 6.50″ | +100mm to -15mm | Flat to Medium Concave | 44mm to 93.1mm | Up to 6×139.7 | Not Avaialble |
VEHICLE APPLICATIONS & DETAILS
EACH SET CUSTOM BUILT PER ORDER
HEAVY DUTY | APPLICATIONS
Ford F250 Super Duty (8×170)
Chevrolet Silverado 2500 (8×170)
Chevrolet Silverado 2500 (8×180)
Dodge Ram 2500 (8×165)
GMC Sierra 2500 (8×165)
Nissan Titan XD (6×139.7)
Many More…
LIGHT DUTY | APPLICATIONS
Ford F150/Raptor (6×135)
Chevrolet 1500 (6×139.7)
Nissan Titan (6×139.7)
Toyota Tacoma (6×139.7)
Toyota 4 Runner (6×139.7)
Toyota FJ Cruiser (6×139.7)
Many More…
